Home » Car » 180 Degree Thermostat Vs 195 Degree: Ultimate Comparison
180 Degree Thermostat Vs 195 Degree

180 Degree Thermostat Vs 195 Degree: Ultimate Comparison

As you know, the engine thermostat is one device that plays a vital role in regulating the car engine’s temperature. This part is located in between the radiator and the engine to keep the temperature of the components always within the permissible level. 

Currently, 2 thermostats are widely available today, a 180 Degree Thermostat Vs 195 Degree. The following article will give you an overview of these two thermostats.

About 180 Degree Thermostat

The 180-degree thermostat is one of the most used products today for vehicles. It provides the ability to work efficiently with a wide range of cars. Inside the 180-degree thermostat is a pulsating valve to balance heat in cases of abnormal engine temperature changes.

The 180-degree thermostat is with a flow or an integrated V-groove with a 1-way valve to control the airflow. At this time, the airflow will be reduced and operate more smoothly. In addition, the flow groove can also be with a heat motor to increase the efficiency of the thermostat.

Besides, the use of a 180-degree thermostat will allow users to apply

for both long-distance and heavy-duty vehicles effectively. It does not discriminate in terms of performance on any device. 

Therefore, many car manufacturers now use 180 thermostats for their car products. In addition to quality, many manufacturers choose because the investment cost of the 180 thermostats is relatively low.

Outstanding Features:

  • Working temperature 180 degrees F
  • Have a longer average life than conventional thermostats thanks to the robust stainless steel rim and loxo.
  • Modern technologies will control the airflow and have better performance than OE thermostats.

Therefore, there will be no reason for you to refuse to choose a 180-degree thermostat yourself. Because this device fully converges factors to help create stability for your engine. When your engine heats up too high, it causes the coolant level to drop suddenly, which could be because the thermostat is having a problem.

About The 195 Degree Thermostat

Not only a 180-degree thermostat, a 195-degree thermostat is also a product used by many drivers today. When the coolant system travels to the engine and passes through the radiator, the thermostats will begin to perform their heat-regulating task. 

At this time, the V-groove will help the thermostat work more efficiently when it opens slowly until reaching the climax. This system will help with better fuel management than a superior operating engine.

Outstanding Features:

The 195-degree thermostat is one of the environmentally friendly engine cooling technologies, safe for all vehicles.

  • Wax flow is controlled and works without interference
  • Has strong applicability to heavy vehicles
  • Strongly prolongs life thanks to the rust-resistant steel housing.

It can be that the 195-degree engine thermostat is an essential and indispensable device for every car because any long-term failure will cause significant damage to your engine system. One of the risks that make it challenging to start your car after filling up with gas is because the thermostat is causing the fuel transmission system to fail. The engine will not be provided with enough resources to operate correctly.

180 Degree Thermostat Vs 195 Degree

180 Degree Thermostat Vs 195 Degree

To compare 180 and 195-degree thermostats, you would be hard-pressed to judge their quality because each device will have its advantages and disadvantages. You must recognize the right thermostat for your vehicle.


  • Thermostat 180 degrees: 45868
  • 195-degree thermostat: STA 45359

The ability to control the flow

It is one of the critical factors to the quality of a thermostat. Flow too large or too small will directly affect the performance of the motor. 180 degree and 195-degree thermostats both possess better flow control than OE thermostats.

Weight and size

A 180-degree thermostat is heavier in weight and size than a 195-degree thermostat. Specifically, a 180-degree thermostat weighs 2.56 once and dimensions of 3.8×2.8×1.7 inches. As for the 195-degree thermostat, it weighs 2.4 once and measures 2.28×2.8×2.72 inches.

Heat engine

The heat engine of a 180-degree thermostat will be larger than average. The 195 degrees Celsius heat engine has an average heat engine, smaller than the 180-degree thermostat.

Thermostat material

Material is one of the essential criteria that determine the utilization rate of the thermostat. Specifically, both 180-degree and 195-degree thermostats have stainless steel flanges. From there, the life of the regulator will be significantly improved.

Some Frequently Asked Questions

Is a 180-degree thermostat good for winter?

The answer is yes. The 180-degree thermostat is perfectly suitable for winter weather conditions. When 180 degrees turn hot early, it will also close quickly. That way, your engine will be well-safe from low temperatures. 

Theoretically, the heat of a machine could drop below 165. At that point, the indicators need to be warmed up to about 15 degrees, which is not a big challenge compared to the 30 degrees of 195 readings.

What are the benefits of a 180 degree thermostat?

The temperature of the car will depend on many factors: coolant, fan, radiator, ambient air,… 

Therefore, using a 180-degree thermostat will help your car always have heat. At that time, your vehicle will come out of the engine knocking when accelerating. This is one of the common phenomena when the thermostat has a problem in engine performance.

180 Degree Thermostat and 195 Degree, Which Is Better?

You won’t compare the quality of a 180 degree and 195-degree thermostat because these two products are of excellent quality and are widely available today. The main difference between 180 degrees and 195 degrees thermostats is the 15-degree temperature gap.


Hopefully, the article will help you overview 180-degree thermostats and 195-degree thermostats. Both sets of products have flanges made of stainless steel, which minimizes the influence of the external environment. 

In addition, with both 180-degree and 195-degree radiators, you can ultimately use it for many different car models without worrying about performance.

If you have any related questions, do not hesitate to leave a comment below for the fastest support by our team.

Last but not least, don’t forget to share this article with your friends who may be considering choosing these 2 types!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *